Our Products - Heat Resistant Aluminium Paint 600o C
| TECHNICAL DATA SHEET |
| Product Description |
It is single pack Aluminium paint based on special resin.It has good anticorrosive properties along with dry heat resistance upto 600 ºC |
| Recommended Uses |
This is used as a protective coating for chimneys,spacks, pipelines ,cargo holes etc. |
| PRODUCT SPECIFICATION |
| Mixing Ratio |
N.A. |
| Colour |
Aluminium |
| Finish |
Metallic lusture |
| Pot Life |
N.A. |
| Volume Solids |
40 % ± 2 |
| Flash point |
Above 24 °C |
| Recommended DFT |
25-30 microns per coat |
| Covering Capacity |
13-16 sq. mtrs / ltr |
| (Theoretical) |
- |
| Drying Time |
Surface dry – 1 to 2 hrs at 30 °C & 65 % Relative Humidity.
Hard Dry – 8-10 hrs at 30 °C & 65 % Relative Humidity |
| Stoving Schedule |
N.A. |
| Recoating Time |
Min 10 hrs. at 30 °C & 65 % Relative Humidity Max - None |
| Method of Application |
Brush / Conventional Spray / Airless Spray |
| Thinner recommended |
‘Spectracoat’ Thinner |
| Shelf life |
9 months under normal storage conditions in original sealed containers.
|
| Surface Preparation |
Surface should be free from mill scales , rust , oil , grease , moisture and any other foreign matter and properly primed.
|
| Subsequent Coat |
N.A.
|
| Remarks 1. Application Data |
| Method |
Pressure ( Atm) |
Nozzle |
Thinner |
Thinner volume |
| Brush |
- |
-
|
Spectracoat Thinner |
0 – 5 % |
| Conven. Spray |
4-5 |
0.021 inch
|
Spectracoat Thinner |
10 – 15 % |
| Airless Spray |
4-5 |
0.013 inch to 0.021inch
|
Spectracoat Thinner |
0 – 5% |
2. Don’t use below 10 �C
3. Store in cool & dry place
4. Mix till homogeneous & leave for 15 minutes before use.
| Safety Precautions : |
| Provide sufficient ventilation while working with solvent based paints in confined spaces and stagnant air. |
Keep the material away from heat , spark and direct flame |
| Avoid inhalation of solvent vapour or paint mist by using facial mask .Use goggles and gloves to protect against direct contact of paint with
skin and eyes. |
In case of contamination , rinse with fresh running water and seek medical help at once. |
| Follow local & national safety rules. |
| Special Comments : |
| Thinner consumption and actual coverage of paint depends on the site conditions. |
Stir the paint well before painting and while painting if necessary. |
| Material should be stored at 30 �C temperature in dry place.
|
